Do this at your own risk. And check and follow the local regulations.
Prerequisites:
Here's the procedure for Maivc Pro:
Continue reading Enable Mavic Pro with FCC Standard Single StrengthDO IT AT YOUR OWN RISK!
What is u-boot?
U-boot is a universal boot loader which starts when you plug in the power cable. It runs itself to check the board and make some initial configuration. After feeling everything’s right, it loads the main OS and start the system. More information can be found at: http://wiki.openwrt.org/doc/techref/bootloader/uboot
Which u-boot to install?
Continue reading Install web failsafe u-boot for WR703N
That's the thing I made. I'll edit this post with more detailed information later.
| Meterial | Count | in CNY | in USD(6.4:1) | Comment |
| Box | 1 | 0 | 0 | from a box of Hershey's |
| Wire | 10 | 0.15 | 0.02 | |
| Glue stick | 3 | 0.9 | 0.14 | |
| Battery | 1 | 20 | 3.13 | 3.7v/3700mhA |
| protective circuit for battery | 1 | 3.8 | 0.59 | |
| Solar pannel | 1 | 6.8 | 1.06 | 4.5v/78mA |
| Schottky diode | 1 | 0.5 | 0.08 | ID 5819 |
| booster circuit | 1 | 8 | 1.25 | pre-made, output 5V/500mA |
| LED | 1 | 0.1 | 0.02 | |
| Resister | 1 | 0.02 | 0 | 2.2k |
| USB mini port | 1 | 0.28 | 0.04 | |
| self-lock button | 1 | 0.33 | 0.05 | 7*7mm |
| capaciter | 3 | 0.06 | 0.01 | 1μf |
| Battery Charger IC | 1 | 9 | 1.41 | MAX1555 |
| bread board | 1 | 4 | 0.63 | |
| Total price | 53.94 | 8.43 |
[code='cpp']
void main()
{
printf("Hello world!\n");
}
[/code]
This blog was born at this very moment!
At last I've got a domain and set up this wordpress to build up a whole new blog. Big thanks to Indarkness for a lot of stuff.
I may now consider writing something about daily life 😀
Welcomes your visit! You can leave any message here.
感谢来访！欢迎留言
